Dri-Eaz DrizAir 1200 Dehumidifier Manual

This manual provides comprehensive information on the Dri-Eaz DrizAir 1200 dehumidifier, a commercial refrigerant dehumidifier designed for drying building structures. It covers safety precautions, features, installation, operation, maintenance, troubleshooting, parts and accessories, warranty information, contact information, additional resources and frequently asked questions.

Introduction

Welcome to the Dri-Eaz DrizAir 1200 Dehumidifier manual. This manual provides you with all the information you need to safely operate and maintain your DrizAir 1200 dehumidifier. The DrizAir 1200 is a powerful and versatile dehumidifier that is designed for drying building structures and contents. It is ideal for use in a variety of applications, including water damage restoration, structural drying, construction, and more. This manual will guide you through the features, installation, operation, and maintenance of your DrizAir 1200.

We encourage you to read this manual carefully before operating your DrizAir 1200. By following the instructions in this manual, you can ensure that your dehumidifier operates safely and efficiently. If you have any questions or concerns about your DrizAir 1200, please contact Dri-Eaz customer service.

The DrizAir 1200 is a compact, highly maneuverable standard dehumidifier that removes moisture from everyday spills and reduces humidity in basements, facilities or on construction sites. It is a proven and durable dehumidifier that has been trusted by professionals for over 20 years! This dehumidifier runs on a 115-volt (15 amp) grounded outlet, which is standard in most homes. For the DrizAir 1200 press the on button on the touchpad. If the unit experiences a loss of power, which can result from a power interruption or overheating, we recommend you let the unit sit off for five minutes before restarting.

Safety Precautions

Your safety and the safety of others is our top priority. Please read and follow these safety precautions carefully before operating your DrizAir 1200 dehumidifier. Failure to follow these precautions could result in serious injury or death.

General Safety Precautions

• Do not use the DrizAir 1200 in areas where it may be exposed to flammable or explosive materials.
• Do not operate the DrizAir 1200 in a wet or damp location.
• Do not use the DrizAir 1200 outdoors.
• Do not block the air intake or exhaust vent of the DrizAir 1200.
• Do not place the DrizAir 1200 on an unstable surface.
• Do not use the DrizAir 1200 for any purpose other than its intended use.

Electrical Safety Precautions

• Do not operate the DrizAir 1200 if the power cord is damaged or frayed.
• Do not pull or tug on the power cord.
• Do not use an adapter with the DrizAir 1200.
• Do not operate the DrizAir 1200 if the power cord is wet.
• Always unplug the DrizAir 1200 before cleaning or performing any maintenance.

Child Safety Precautions

• Keep the DrizAir 1200 out of reach of children.
• Never allow children to play with the DrizAir 1200.

Features and Specifications

The Dri-Eaz DrizAir 1200 dehumidifier is a powerful and efficient unit designed to remove moisture from enclosed structural environments. It’s a reliable choice for water damage restoration, structural drying, construction, and various other applications. Here’s a breakdown of its key features and specifications⁚

• High Moisture Removal Capacity⁚ The DrizAir 1200 boasts an impressive moisture removal capacity of up to 64 pints per day (AHAM rated at 80°F and 60% RH). It can remove up to 15 gallons of water per day, effectively tackling even challenging humidity situations.
• User-Friendly Control Panel⁚ The unit features a user-friendly touchpad control panel with a single, easy-to-read digital display. You can easily adjust settings using the four soft-touch control keys.
• Rugged and Durable Construction⁚ Built for demanding environments, the DrizAir 1200 is engineered to be rugged, durable, and highly portable. Its sturdy design makes it ideal for various work environments.
• Compact and Maneuverable⁚ Despite its powerful capacity, the DrizAir 1200 remains compact and maneuverable, allowing for easy transport and placement in different locations.
• Versatile Applications⁚ The DrizAir 1200 is a versatile unit suitable for a wide range of applications, including water damage restoration, structural drying, construction, and general humidity control in residential and commercial settings.

The DrizAir 1200 dehumidifier is a reliable, efficient, and user-friendly solution for controlling humidity levels in various environments. Its impressive features and capabilities make it a valuable tool for professionals and homeowners alike.

Installation and Setup

Setting up your Dri-Eaz DrizAir 1200 dehumidifier is a straightforward process. Follow these steps for proper installation and setup to ensure optimal performance and safety⁚

1. Location Selection⁚ Choose a location for the dehumidifier that is well-ventilated, away from direct sunlight, heat sources, and potential water damage. Ensure ample space around the unit for proper airflow.
2. Power Connection⁚ The DrizAir 1200 operates on a standard 115-volt (15 amp) grounded outlet. Connect the unit to a properly grounded electrical outlet. Never use an adapter.
3. Drainage⁚ The DrizAir 1200 comes equipped with a built-in condensate pump. Connect a drainage hose to the pump outlet and direct it to a suitable drainage point, such as a floor drain or a bucket. Ensure proper drainage to prevent overflow.
4. Initial Operation⁚ After connecting the power and drainage, turn the unit on. Allow the dehumidifier to run for a few hours to remove any initial moisture buildup in the environment. Monitor the unit’s performance and adjust settings as needed.
5. Airflow Considerations⁚ For optimal efficiency, ensure proper airflow around the dehumidifier. Avoid obstructing the air intake and exhaust vents. Consider using air movers to circulate the air and enhance drying effectiveness.
6. Safety Precautions⁚ Always unplug the dehumidifier before cleaning, moving, or performing any maintenance tasks. Keep wiring and motor dry. Do not operate the unit in environments where corrosive chemicals are present, such as chlorine.

By following these installation and setup guidelines, you can ensure your Dri-Eaz DrizAir 1200 dehumidifier operates safely and effectively, effectively removing moisture from your desired space.

Operation

Operating the Dri-Eaz DrizAir 1200 dehumidifier is user-friendly and straightforward. The unit features an intuitive touchpad control system with a digital display, making it easy to adjust settings and monitor performance. Here’s a step-by-step guide to operating the dehumidifier⁚

1. Power On/Off: To power on the unit, press the “On” button on the touchpad. To power off the unit, press the “Off” button.
2. Humidity Setting⁚ Use the “Humidity” control keys to adjust the desired humidity level. The digital display will show the current humidity level and your setpoint. The dehumidifier automatically operates to maintain the desired humidity level.
3. Fan Speed⁚ The DrizAir 1200 offers adjustable fan speeds. Use the “Fan” control keys to select the desired fan speed. Higher fan speeds provide faster air circulation and drying rates, while lower fan speeds offer quieter operation.
4. Timer⁚ The unit includes a timer function, allowing you to set a specific operating duration. Use the “Timer” control keys to set the desired operating time.
5. Auto Restart⁚ In the event of a power interruption, the dehumidifier automatically restarts when power is restored. This ensures continuous operation and maintains the desired humidity level.
6. Maintenance Reminder⁚ The dehumidifier features a maintenance reminder that alerts you when it’s time for routine cleaning and maintenance.

The Dri-Eaz DrizAir 1200 dehumidifier is a powerful and reliable moisture removal solution. By understanding its operation, you can effectively utilize its features to create a comfortable and healthy indoor environment.

Maintenance

Regular maintenance is essential for ensuring optimal performance and longevity of your Dri-Eaz DrizAir 1200 dehumidifier. Follow these maintenance guidelines to keep your unit operating efficiently⁚

1. Clean the Air Filter Regularly⁚ The air filter should be cleaned at least every two weeks, or more often if operating in dusty environments. Remove the filter, gently tap it to dislodge dust and debris, and rinse it with clean water. Allow the filter to air dry completely before reinstalling.
2. Empty the Water Tank⁚ The water tank should be emptied regularly, as it fills up with the collected moisture. To empty the tank, disconnect the unit from the power source, remove the tank, and pour out the water. Clean the tank with a mild detergent solution and rinse it thoroughly before reinstalling.
3. Clean the Condenser Coils⁚ The condenser coils can become dusty, affecting the dehumidifier’s efficiency. To clean the coils, use a vacuum cleaner with a brush attachment to remove dust and dirt. Alternatively, you can use a soft-bristled brush and a mild detergent solution. Be sure to dry the coils thoroughly before reinstalling.
4. Check the Drain Hose⁚ The drain hose should be checked regularly for clogs or leaks. Clean the hose with a brush or a hose cleaner to ensure proper drainage.
5. Inspect the Electrical Cord⁚ The electrical cord should be inspected for any damage or wear. If any damage is found, replace the cord immediately.

By following these maintenance guidelines, you can extend the life of your Dri-Eaz DrizAir 1200 dehumidifier and ensure its reliable performance for years to come.

Troubleshooting

While the Dri-Eaz DrizAir 1200 dehumidifier is designed for reliable operation, occasional issues may arise. Here are some common troubleshooting steps to address potential problems⁚

1. Unit Not Turning On⁚ Check if the unit is plugged in and the power cord is securely connected. Ensure the circuit breaker has not tripped. Verify that the power switch is in the “on” position. If the unit still does not turn on, contact Dri-Eaz customer service.
2. Unit Running but Not Dehumidifying⁚ Check if the air filter is clean and free of obstructions. Ensure the drain hose is clear and not kinked. Verify that the room temperature is above 60°F (15°C). If the issue persists, contact Dri-Eaz customer service.
3. Unit Collecting Too Little Water⁚ The room air may be too dry. Check the humidity level with a hygrometer. Increase the room temperature if possible. If the issue persists, contact Dri-Eaz customer service.
4. Unit Making Unusual Noise⁚ Check if the drain hose is kinked or blocked. Ensure the unit is level and not vibrating against any objects. If the noise persists, contact Dri-Eaz customer service.
5. Unit Leaking⁚ Check if the drain hose is properly connected and secured. Ensure the water tank is not full and overflowing. If the leak persists, contact Dri-Eaz customer service.

If you encounter any issues that cannot be resolved using these troubleshooting steps, it’s essential to contact Dri-Eaz customer service for further assistance.

Parts and Accessories

The Dri-Eaz DrizAir 1200 dehumidifier is designed to provide efficient moisture removal, and a range of optional parts and accessories can further enhance its performance and functionality. Here are some key components you may consider⁚

• Replacement Air Filter⁚ The DrizAir 1200 features an air filter to remove dust and particles from the air. Regular replacement of the air filter ensures optimal performance and extends the lifespan of the dehumidifier. Dri-Eaz offers replacement air filters specifically designed for the DrizAir 1200.
• Drain Hose⁚ The DrizAir 1200 is equipped with a drain hose for continuous water removal. Longer drain hoses are available to extend the reach of the drain hose, allowing for more flexible placement of the dehumidifier and easier drainage.
• Pump⁚ For applications where gravity drainage is not feasible, an optional pump can be installed. The pump automatically removes water from the dehumidifier, ensuring uninterrupted operation even when the unit is placed in elevated positions.
• TurboDryer Airmovers⁚ Dri-Eaz TurboDryer airmovers complement the DrizAir 1200 by circulating air and accelerating the drying process. Using airmovers in conjunction with the dehumidifier significantly enhances drying efficiency.

Dri-Eaz provides a comprehensive range of parts and accessories to meet the specific needs of your drying application. Contact Dri-Eaz customer service for information on available options and compatibility with the DrizAir 1200.

Warranty Information

Dri-Eaz stands behind the quality and reliability of its products, offering a comprehensive warranty on the DrizAir 1200 dehumidifier. To ensure you understand the scope of coverage and how to claim warranty service, carefully review the following information.

The DrizAir 1200 dehumidifier is typically covered by a limited warranty, typically for a specified period, such as one year from the date of purchase; This warranty covers defects in materials and workmanship under normal use and conditions. The warranty does not cover damages caused by misuse, neglect, accidents, or unauthorized repairs.

To activate the warranty, you must register your DrizAir 1200 dehumidifier with Dri-Eaz within a specified timeframe after purchase. Registration can often be completed online or through a printed warranty card. Keep your original purchase receipt as proof of purchase for warranty claims.

If you experience a problem with your DrizAir 1200 dehumidifier that you believe is covered under warranty, contact Dri-Eaz customer service. They will guide you through the warranty claim process and provide instructions on how to return the unit for repair or replacement.

For detailed information regarding warranty coverage, limitations, and procedures, refer to the warranty document that came with your DrizAir 1200 dehumidifier. The warranty information is also likely available on the Dri-Eaz website or through their customer service department.

Contact Information

For assistance with your Dri-Eaz DrizAir 1200 dehumidifier, you can reach out to Dri-Eaz through various channels. Whether you have questions about operation, maintenance, warranty, or need to report a problem, their dedicated customer service team is available to help.

The primary contact information for Dri-Eaz is their toll-free phone number⁚ 800-932-3030. This number is available during business hours and is the quickest way to connect with a customer service representative. For inquiries outside of business hours or if you prefer written communication, you can reach Dri-Eaz through email at their official website, www.dri-eaz.com; Their website also includes a dedicated section for customer support, where you can find answers to frequently asked questions and submit online forms for inquiries.

If you need to contact Dri-Eaz regarding warranty claims, technical support, or parts and accessories, you can also use their fax number⁚ 360-757-7950. This number is primarily used for written communication, and you can send your inquiries via fax. For international inquiries or inquiries regarding Dri-Eaz products sold outside of the US, you can contact their international offices or distributors listed on their website.

When contacting Dri-Eaz, be sure to have your DrizAir 1200 dehumidifier’s model number and serial number readily available. This information will help them identify your specific unit and provide appropriate support.

Additional Resources

Beyond the information provided in this manual, Dri-Eaz offers various additional resources to enhance your understanding and utilization of the DrizAir 1200 dehumidifier. These resources can be accessed through their website, www.dri-eaz.com, and provide valuable insights into specific aspects of the product and its application.

One valuable resource is the Dri-Eaz online library, which houses a collection of downloadable manuals, brochures, and technical documents. Here, you can find detailed specifications, troubleshooting guides, and maintenance tips for the DrizAir 1200 dehumidifier, as well as other Dri-Eaz products. The library also offers information on compatible accessories, parts, and replacement components, allowing you to easily find the necessary items for your unit.

Dri-Eaz recognizes the importance of staying informed about the latest industry advancements and product updates. Their website features a dedicated blog section that provides valuable insights into the world of dehumidification. You can find articles and resources covering topics like moisture control, drying techniques, and best practices for using dehumidifiers in various applications. The blog also highlights new product releases, updates, and industry events, keeping you abreast of the latest developments in the field.

For those seeking more specialized information, Dri-Eaz provides access to a network of authorized dealers and service centers. These professionals are well-versed in the DrizAir 1200 dehumidifier and can provide expert advice, installation support, and repair services. You can find a list of authorized dealers and service centers near you on the Dri-Eaz website.